TS8100 Series Progressive Cavity Pump, 200ml

The TS8100-200 PC Pump is a continuously volumetric dispense pump design based on Progressive Cavity (PC) technology. PC Pump uses a special stator and rotor design to provide accurate and consistent dispensing output. The turning rotor on the TS8100 moves the fluid in tightly sealed cavities through the stator's fluid chambers to create a volumetric fluid flow that does not change the shape or size of the fluid. Due to the PC Pump's unique dispensing technology, accuracy and repeatability of ± 1 percent is achievable. The pump can dispense a wide range of fluids, from low-viscosity coatings to high-viscosity greases.

Typical Applications

Underfill for PCBA Components | Encapsulation and Potting Materials | Lubrication on Automotive parts | Paste and Flux

Specifications

• Size L x W: 8.1" x 1.34" / 205.7 x 34mm
• Weight: 0.84lbs. / 380g
• Fluid Inlet Port: 1/8" NPT female
• Fluid Outlet Port: Luer taper and cap
• Motor: 24 VDC
• Dispensing Volume Per Rotation: 0.047 ml average
• Flow Rate: 0.47 - 5.7 ml/min
• Min. Dispense Amount: 0.001 ml
• Precision ± Absolute: ± 1%
• Self-Sealing: 2 bar (30 psi) * [ 2 ]
• Direct Mount: 3 - 55 ml Syringe
• Mounting Port: M5
• Viscosity Range: 1 - 300,000 cps
• Wetted Parts: Acetal, SS, PFE, UHMWPE