Permabond

UV610 Glass-to-Metal UV-Curable Adhesive, Clear

In Stock

Permabond® UV610 is a single-part, fast-setting, UV-curable adhesive designed specifically for bonding glass and metal. Its high strength makes it suitable for a wide range of applications including glass furniture where it is possible to create high-strength edge joints.

Cure on demand
High shear strength
Fast curing with low-power lamps
100% solids, no solvents
Excellent adhesion to metal and glass

As low as $35.72

Skip to the beginning of the images gallery

Technical Documents

Product Info & TDS Sheets

Permabond UV610 Technical Data Sheet

Details

More Information
PAC Item Code	C100354
Brand	Permabond
Type	UV Adhesive

More Information

Physical Properties of Uncured Adhesive

Chemical composition: Methacrylate ester
Appearance: Translucent
Viscosity @ 25°C: 20rpm: 600-1300 mPa.s (cP)
Specific gravity: 1.0

Typical Curing Properties

Typical fixture time*:
- Low power 4mW/cm² battery lamp: 10 secs
- LED 100mW/cm² lamp: 2 secs
- UV light guide 30W/cm²: 1 sec
Cure wavelength: 365 - 400 nm**

*The cure time depends on the power of the UV lamp, its spectral output, the distance between the lamp and the components, and the transmission characteristics of the substrates.

**LED UV lamps have a narrow range of spectral output. It is important to check suitability with Permabond to match the LED lamp's peak wavelength with that of the adhesive's photoinitiator to ensure optimal adhesive cure.

Typical Performance of Cured Adhesive

Tensile strength (ASTM D-2095-69) steel to glass*: 13-16 N/mm² (1900 psi - 2300 psi)
Tensile strength (ISO37): 17 N/mm² (2500 psi)
Refractive index (cured): >1.490
Elongation (ISO37): 95%
Hardness (ISO868): 65-75 Shore D
Dielectric strength: 12 KV/mm
Dielectric constant 1MHz@25°C: 4
Water absorption (ISO62) 2 hours in boiling water: 3%

*Strength results will vary depending on the level of surface preparation and gap.