Permabond

LM012 Hydraulic Sealing Anaerobic Thread Sealant, Brown

In Stock

Permabond® LM012 is an unfilled, medium-viscosity anaerobic adhesive. Its major benefit as related to other pipe sealants is that it is an unfilled resin that is compatible with hydraulic fluids. If the adhesive is accidentally spilled into the hydraulic system, e.g., squeezed out of the joint, it will be dispersed in the fluid. It contains no particles that can clog or foul hydraulic screens and valves. Thus it is used in very sensitive high-pressure hydraulic systems.

Full cure seal to the burst rating of the pipe
Easy to use and apply
Directional freedom
Does not contain solvents
Excellent chemical and temperature resistance
Cures at room temperature
Ideal for sealing hydraulic systems

As low as $13.42

Skip to the beginning of the images gallery

Technical Documents

Product Info & TDS Sheets

Permabond LM012 Technical Data Sheet

Details

More Information
PAC Item Code	C100348
Brand	Permabond
Type	Threadsealer

More Information

Physical Properties of Uncured Adhesive

Chemical composition: Methacrylate esters
Appearance: Brown
Viscosity @ 25°C: 2,000 mPa.s (cP)
Specific Gravity: 1.1
Particle Size: <10µm
UV fluorescence: Yes

Typical Curing Properties

Maximum gap fill: 0.2mm (0.008")
Maximum thread size: M20 (3/4")
Time taken to reach handling strength (M10 steel) @23°C: 30 minutes*
Full strength (M10 steel) @23°C: 24 hours

*Handling time at 23°C / 73°F. Copper and its alloys will make the adhesive cure more quickly, while oxidized or passivated surfaces (like stainless steel) will reduce cure speed. To reduce curing time, use Permabond activator A905 or ASC10 alternatively, increasing the curing temperature will reduce curing time.

Typical Performance of Cured Adhesive

Torque strength (M10 steel ISO10964)
- Break: 3 N·m (25 in.lb)
- Prevail: 2 N·m (15 in.lb)
Shear strength (steel collar & pin ISO10123): 5 MPa (750 psi)
Coefficient of thermal expansion: 90 x 10^-6mm/mm/°K
Coefficient of thermal conductivity: 0.19 W/(m.K)