Permabond

HM162 High-Temperature Fast Cure Retaining Compound, Green

In Stock

Permabond® HM162 is a medium viscosity retaining compound that cures when confined between metal parts to form an extremely tough bond. It is best suited for cylindrical parts and where high-temperature resistance is required. In the uncured, liquid state, the adhesive wets the metal surfaces, keying into all surface irregularities and filling the space between the mated parts.

Rapid cure
Very high strength
Improved fatigue life
Excellent chemical resistance
Excellent temperature resistance

As low as $13.42

Skip to the beginning of the images gallery

Technical Documents

Product Info & TDS Sheets

Permabond HM162 Technical Data Sheet

Details

More Information
PAC Item Code	C100344
Brand	Permabond
Type	Retaining Compound

More Information

Physical Properties of Uncured Adhesive

Chemical composition: Acrylic
Appearance: Green
Viscosity @ 25°C: 1,000 mPa.s (cP)
Specific Gravity: 1.1
UV fluorescence: Yes

Typical Curing Properties

Maximum gap fill: 0.2mm (0.008")
Time taken to reach handling strength (M10 steel) @23°C: 5 minutes*
Time taken to reach working strength (M10 steel) @23°C: 1-3 hours
Full strength (M10 steel) @23°C: 24 hours

*Handling time at 23°C / 73°F. Copper and its alloys will make the adhesive cure more quickly, while oxidized or passivated surfaces (like stainless steel) will reduce cure speed. To reduce curing time, use Permabond activator A905 or ASC10 alternatively, increasing the curing temperature will reduce curing time.

Typical Performance of Cured Adhesive

Torque strength (M10 steel ISO10964)
- Break 32 N·m (280 in.lb)
- Prevail 57 N·m (510 in.lb)
Shear strength (steel collar & pin ISO10123): 30 MPa (4300 psi)
Coefficient of thermal expansion: 90 x 10^-6mm/mm/°C
Dielectric strength: 11 kV/mm
Thermal conductivity: 0.19 W/(m.K)