Permabond

ET5145 Flow Controlled FDA Compliant Two-Part Epoxy, White/Ivory

In Stock

Permabond® ET5145 is a 1:1 mixable epoxy adhesive. It has excellent resistance to impact and vibration and is ideal for structural bonding of metal, wood, composites, and certain plastics. ET5145 is high strength and has excellent environmental durability. It is suitable for applications where a cured product is to come into contact with food or beverage. Permabond ET5145 has been specifically formulated to meet the requirements of FDA 175.105.

Adhesion to a wide variety of substrates
Full cure at room temperature
FDA Compliant formulation
High shear and peel strength
Good impact strength
Static mixer included with each cartridge

As low as $390.00

Skip to the beginning of the images gallery

Technical Documents

Product Info & TDS Sheets

Permabond ET5145 Technical Data Sheet

Details

More Information
PAC Item Code	C100399
Brand	Permabond
Type	Two-Part Epoxy

More Information

Physical Properties of Uncured Adhesive

	ET5145A	ET5145B
Chemical Composition	Epoxy Resin	Polyamine Hardener
Appearance	White	Ivory
Viscosity @25°C	20rpm: 50,000-80,000 mPa.s (cP) 2rpm: 200,000-300,000 mPa.s (cP)	20rpm: 100,000-200,000 mPa.s (cP) 2rpm: 250,000-400,000 mPa.s (cP)
Specific Gravity	1.3	1.3

Typical Curing Properties

Mix ratio by volume: 1:1
Maximum gap fill: 2mm (0.08")
Usable / pot life @23°C: 50-80 mins
Handling time @23°C: 3-5 hours
Working strength:
- @23°C: 16 hours
- @60°C: 30 minutes
Full cure:
- @23°C: 72 hours
- @60°C: 1 hour

Typical Performance of Cured Adhesive

Shear strength* (ISO4587)
- Mild steel: 19-21 N/mm² (2800 -3000 psi)
- Stainless steel: 18-21 N/mm² (2600 -3000 psi)
- Aluminium: 10-14 N/mm² (1450 -2000 psi)
Peel strength (aluminum) (ISO4578): 30-50 N/25mm (7-11 PIW)
Hardness (ISO868): 75-85 Shore D
Glass transition temperature Tg: 40-50°C (104-122°F)
Dielectric strength: 15-25 kV/mm