Permabond CA001700016Z0101

170 Metal Bonding Max. Gap Fill Cyanoacrylate Adhesive, Clear, 16 oz. Bottle

Permabond® 170 is a methyl cyanoacrylate adhesive. It is a single-part, high-viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. Permabond® 170 will cure to a fixture strength in 15 seconds on most surfaces and strength development is rapid. The adhesive was designed specifically for bonding metal surfaces, providing excellent bond strength to steel, aluminum, and most metal surfaces. The methyl cyanoacrylate will also adhere well to various other materials including most plastics and rubbers. Permabond® 170 has been formulated to be less aggressive to sensitive plastic surfaces such as Styrofoam™, polycarbonate, and ABS.

Fast-setting
Ideal for bonding metals
Rapid development of high-strength
Less aggressive to sensitive plastics
Approved to MIL-A-46050C Type 1 Class 3

$268.95

Buy 2 for $260.88
Buy 6 for $252.81

Skip to the beginning of the images gallery

Technical Documents

Product Info & TDS Sheets

Permabond 170 Technical Data Sheet

Details

Physical Properties of Uncured Adhesive

Chemical composition: Methyl cyanoacrylate
Appearance: Colourless to slightly cloudy
Viscosity @ 25°C: 1,500 mPa.s (cP)
Specific gravity: 1.1

Typical Curing Properties

Maximum gap fill: 0.38mm (0.015")
Fixture/handling time* (0.3 N/mm² shear strength is achieved):
- 15 seconds (Steel)
- 15 seconds (Buna N Rubber)
- 15 seconds (Phenolic)
Full strength: 24 hours

*Handling times can be affected by temperature, humidity and specific surfaces being bonded. Larger gaps or acidic surfaces will also reduce cure speed but this can be overcome by the use of Permabond C Surface Activator (CSA) or Permabond QFS 16.

Typical Performance of Cured Adhesive

Shear strength* (ISO4587):
- Steel 23-25 N/mm² (3300-3600 psi)
- Aluminium 13-15 N/mm² (1900-2200 psi)
- Brass 20-22 N/mm² (2900-3200 psi)
- Stainless st. 20-22 N/mm² (2900-3200 psi)
- ABS >9 N/mm² (>1300) SF**
- Acrylic 13-15 N/mm² (1900-2200psi)
- Nitrile rubber >4 N/mm² (>550 psi) SF**
- Butyl rubber >2 N/mm² (>300 psi) SF**
- Phenolic >10N/mm² (>1400 psi) SF**
Impact strength (ASTM D-950): 3-5 kJ/m² (1.4-2.4 ft-lb/in²)
Dielectric constant @10kHz: 2.5
Dielectric strength: 25 kV/mm
Coefficient of thermal expansion: 90 x 10^-6mm/mm/°C
Coefficient of thermal conductivity: 0.1 W/(m.K)
Hardness (ISO868): 85 Shore D