Momentive

General Purpose Moisture Cure Single Component Silicone Paste RTV Adhesive Sealants

In Stock

RTV100 Series one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, and RTV108 sealants are standard strength paste consistency products that can be applied to vertical and overhead surfaces where pourable/self-leveling sealants are not practical.

One-component products
Capability to cure at room temperature and ambient humidity
Self-adhesion properties
Low-temperature flexibility
High-temperature performance
Excellent weather ability and oz.one and chemical resistance
Excellent electrical insulation properties

As low as $152.40

Skip to the beginning of the images gallery

Technical Documents

Product Info & TDS Sheets

Momentive RTV100 Series Technical Data Sheet

SDS/MSDS Sheets

Momentive RTV102 Safety Data Sheet

Momentive RTV103 Safety Data Sheet

Momentive RTV108 Safety Data Sheet

Details

More Information
PAC Item Code	C100320
Brand	Momentive

More Information

Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, additional cure, or two-component silicone rubber compounds are recommended.

Uncured Properties	RTV102, RTV103, RTV108
Consistency	Paste
Color	RTV102: White RTV103: Black RTV108: Translucent
Application Rate, (g/min)	400
Specific Gravity	1.05
Tack-Free Time, minutes	20
Cured Properties⁽¹⁾	RTV102, RTV103, RTV108
Mechanical:
Tensile Strength, kg/cm² (lb/in²)	28 (400)
Elongation, %	450
Hardness, Shore A	30
Tear Strength, kg/cm (lb/in)	8 (45)
Shear Strength, kg/cm² (lb/in²)⁽²⁾	14 (200)
Peel Strength, kg/cm (lb/in)(3)	7 (40)
Electrical:
Dielectric Strength, kv/mm (v/mil)	20 (500)
Dielectric Constant @ 60 Hz	2.8
Dissipation Factor @ 60 Hz	0.001
Volume Resistivity, ohm-cm	3 x 10¹⁵
Thermal:⁽⁴⁾
Brittle Point, °C (°F)	-60 (-75)
Maximum continuous operating temperature, °C (°F)	204 (400)
Maximum intermittent operating temperature, °C (°F)	260 (500)
Additional Information:⁽⁴⁾
Thermal Conductivity, cal/sec/cm², °C/cm (Btu/hr/ft², °F/ft)	0.0005 (0.12)
Coefficient of Expansion, cm/cm, °C (in/in, °F)	27 x 10^-5 (15 x 10^-5)

(1) Cure time 3 days at 25°C (77°F) / 50% relative humidity.
(2) At 100% cohesive failure.
(3) At 100% cohesive failure using 1 in. x 8 in. stainless steel screen at 180° pull angle.
(4) Information is provided for customer convenience only. These properties are not tested on a routine basis.