Gordon Brush SST2B

Conductive Applicator Brush with 3/16" Brass 0.003" dia. Bristles, 1/8" Trim & 1/8" dia. Stainless Steel Tube Handle, 3-1/2" OAL

In Stock ESD-Safe

Conductive brushes have a surface resistivity of 10 - 10⁴ and are perfect when you need to remove static buildup from the work surface. Conductive brushes will act as a conduit between the charged surface and the path to ground. Made with fully Conductive materials that are active static eliminators. Please use the brushes with a wrist strap or other mechanism to provide path to ground. For fine detail cleaning and fluid application.

Material: Brass
Handle Length: 3-1/2"
Diameter: 1/8"
Bristle Trim Length: 1/8"
Tuft Diameter: (Oval) 1/8"
Category: Conductive Anti-Static
Handle Material: Stainless Steel

$9.92

Buy 20 for $9.72
Buy 50 for $9.42
Buy 100 for $8.93

Skip to the beginning of the images gallery

Details

This conductive applicator brush has 0.003" soft brass wire and a stainless steel tube handle. Constructed with strong mechanical clamping for maximum fill retention, and contains no adhesives that can leach out and contaminate work areas. 1/8" trim, brush face 3/16" wide, and a handle length of 3-1/2" x 1/8" diameter. This brush has a maximum use temperature of 500°F. For other brush size options within this series using 0.003" brass wire, see parts: SST6B, SST10B, SST12B.

Conductive brushes have a surface resistivity range of 10²Ω/cm - 10⁴Ω/cm and are used to remove static buildup from the work surface. Conductive brushes will act as a conduit between the charged surface and the path to ground. Made with fully conductive materials that are active static eliminators. Use conductive brushes with a wrist strap or other mechanism to provide a path to ground.