Desco 19651

Multi-Mount Continuous Monitor

In Stock ESD-Safe

Single Workstation Continuous Monitor: Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
IMPROVED Operator Alarm: Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and the monitor’s jack is intermittent
Mat Monitor Switch: Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
Audible Alarm Adjustment: Sets the audible alarm volume from loud to louder
19653 Remote Alarm Accessory: Connect to the Multi-Mount Monitor and place in the operator’s field of view to alert the operator of alarms
Desco Wave Distortion Technology: Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor
Park Snap: Allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm
Single-Wire Impedance Design: Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
1.2 Volt Operator Test Voltage: Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
<50 Millisecond Alarm Response Time: Identifies failures and intermittencies that inferior technologies miss
Continuous Visual and Audible Alarms: Illuminates green to indicate proper grounding; illuminates red and sounds an audible alarm when intermittent or failed connection occurs
Calibration Verification: Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
NIST Calibrated with Certificate Included: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
100-240VAC Safety Certified Power Adapter with North American Plug: Works with standard electrical systems in North America, Japan, and Asia
Made in the United States of America

$176.79

Skip to the beginning of the images gallery

Technical Documents

Product Info & TDS Sheets

Desco Multi-Mount Monitor Installation, Operation and Maintenance

Product Videos

Desco Wave Distortion Technology Demonstration

Details

*The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 10⁶ ohms with product qualification testing per ANSI/ESD S1.1. The test range of the monitored circuit is 500 kilohms to 10 megohms.

More Information