Delvo DLR5340-WU

Multi Tool Screw Fastening Counter Power Supply

For prevention of human fastening errors and enhanced management and accuracy.

Up to eight kinds of screw fastening conditions can be stored in the internal memory for a wide variety of assembly work
The Count Correction Function does not count elevated screws or double fastening as fastening errors
Count Return Function: When a screw is loosened, a reverse signal output from the electric screwdriver reverses the count by one
Connect up to three screwdrivers to one counter
Count-up signal outputs
Space saving

Special Price $1,135.25 Regular Price $1,195.00

Technical Documents

Product Info & TDS Sheets

Warranty

Count: 0 to 99
Counting Method: Count-up / Count-down
Count Correction Function: Count normal fastening only
Self Adjustable Timer Setting: 0.01 to 2.5 sec
Work Detection Function: Yes (1 terminal) / No
External Count Input: 2 terminals (PARTS A / PARTS B)
Work Installation Timer Setting: 0 to 9.5 sec.
OK Output Timer Setting: 0 to 9.5 sec.
NG Alarm: ON(1) / ON(2) / OFF
OK Buzzer: ON(1) / ON(2) / ON(3) / ON(4) / ON(5) / OFF
Count Return Function: ON / OFF
NG Judge Timing: WORK SET / DRIVER ON
Count Return Function: ON / OFF
Screwdriver Lock Function: ON / OFF
Screwdriver Cord Connection: Single cord connection
External Inputs on Terminal Block(NPN): SENSOR / RESET / TORQUE CHECK / ch1/2/3
External Outputs on Terminal Block(NPN): OK / NG / COUNT-UP / DRIVER A/B/C
Parameter Memory: Parameters stored in internal nonvolatile memory
Power Source: 100 - 240V
External Dimensions: 4.72"(D) x 5.91"(W) x 2.36"(H) / 120mm x 150mm x 60mm
Weight: 1.37 lbs. / 620g