Delvo DLR5040A-WU

Linkable Screw Fastening Counter Power Supply

For prevention of human fastening errors and enhanced management and accuracy.

Ideally suited for the assembly lines of vehicles and electrical equipment requiring reliable screw fastening
The controller receives signals from electric screwdrivers to provide highly reliable screw fastening control
Count Return Function: When a screw is loosened, a reverse signal output from the electric screwdriver reverses the count by one
The Count Correction Function does not count elevated screws or double fastening
Input voltage range from 100 to 240V
Link Connection Function: You can build up a simple sequential screw tightening system by connecting up to ten screw tightening counters in a series without using any external controller
Driver Lock Function prevents unexpected start of screwdrivers
Compact and Lightweight (decreased volume by 30% and mass by 38%)

Special Price $660.25 Regular Price $695.00

Technical Documents

Product Info & TDS Sheets

Warranty

Count: 1 to 99
Counting Method: Count-up / Count-down
Count Correction Function: Count normal fastening only
Self Adjustable Timer Setting: 0.01 to 0.99 sec
Work Detection Function: Yes (1 terminal) / No
External Count Input: 2 terminals (PARTS A / PARTS B)
Work Installation Timer Setting: 0 to 9.5 sec.
OK Output Timer Setting: 0 to 9.5 sec.
NG Alarm: ON(1) / ON(2) / OFF
OK Buzzer: ON(1) / ON(2) / ON(3) / OFF
Count Return Function: ON / OFF
NG Judge Timing: WORK SET / DRIVER ON
Automatic / Manual OK Judge: AUTO / MANUAL
Screwdriver Lock Function: ON / OFF
Multiple Link: Up to 10 counters can be connected
External Inputs on Terminal Block(NPN): SENSOR / RESET / LINK-IN / PARTS A / PARTS B
External Outputs on Terminal Block(NPN): OK / NG / LINK-OUT
Parameter Memory: Parameters stored in internal nonvolatile memory
Power Source: 100 - 240V
External Dimensions: 4.72"(D) x 3.94"(W) x 2.36"(H) / 120mm x 100mm x 60mm
Weight: 1.04 lbs. / 470g