Digital Error-proofing Single Tool Power Supply with 5 Pin, 70W Output, 25-35VDC

Contents

• Error-proofing Power Supply: AM-45
• Power Cord: AT-2W1024
• RPM Adjustment Tool
• 4 Pin Terminal Connector: AT-2T6012 (2pcs)
• 2 Pin Terminal Connector: AT-2T6011
• 2 Pin Terminal Connector: AT-2T6011-1
• Instruction Manual

Specifications

• Input Voltage: 100-240VAC, 50/60Hz
• Power Consumption: 70W
• Output Voltage: 25-35VDC
• Maximum Number of Workpieces: 60,000
• Maximum Screws in Single Workpiece: 99
• Maximum Number of Sample: 99
• Number of Profile/Memo: 10 set
• Fastening time: 0.01 - 9.99 seconds
• Fastening time tolerance: ±1 -99%
• Signal Output Mode: Dry Contact
• Output Voltage Setting: Stepless Control
• Output Pin: 5 Pin
• Output Signal: Switch Signal, Shut-off Signal, Workpiece complete signal, Fastening OK signal, Fastening NG signal
• Input Signal: ON/OFF switch signal
• Number of Controlled Screwdriver: 1pc
• Applicable Model:
  • AT-2000
  • AT-3000
  • AT-4000
  • AT-4500
• Dimension: 176 x 84 x 61mm