30" x 36" x 72" Single-Sided 8000 Series Workstation with Laminate Work Surface & Rounded Front Edge

This 36" L x 72" H x 30" D Arlink 8000 Workstation Single Sided Starter has a plastic laminate work surface and is a stand alone unit, simply add inline adders and corner adders to construct your perfect workstation.

At the heart of the Arlink workstations is the support column. Each column has Macro and Micro slots on each side. The Macro slots allow components like the work surface and light fixture to be adjusted on 3 increments, while components like the power strip and shelves to be mounted on 1 increments in the micro slots. The swivel footrest mounts into slots in the outriggers, they are adjustable in several levels allowing each employee to suit their preferences.

The work surface is made of 1 thick, medium density particle board covered on the top and all sides with 0.030 non-glare matte finish plastic laminate. Unlike most manufacturers, Arlink seals the underside of the work surface with plastic tension sheet to avoid moisture absorption, warping and shedding. All Arlink work surfaces come with a rounded front edge. Though the corner work surfaces are fixed, inline work surfaces can be set at a 0, 15, or 30 degree incline with no extra parts, and no tools required. The 12 deep wire shelves can also be set at three different inclines, again with no parts or tools needed. The 12 deep wire shelves can also be set at three different inclines, again with no parts or tools needed.