Yamato Scientific IN-604-115V

115V Programmable Chilling Incubator, 143 Liter Capacity

These programmable low temperature incubation chambers can be used for a wide variety of applications, such as storage of culture media, serum, and medicine, as well as for cultivation of microorganisms and incubation to environmental testing. Glass inner doors minimize temperature change when inspecting samples.

Fixed setting, programmed (maximum 32 steps, repeat, and graduated operation), Auto stop, and Auto start operating modes are possible, along with easy control capabilities.
Calibration offsetting and integrating time calculation, key lock, and other added functions.
R404A coolant complies with chlorofluorocarbon regulations.
Defrosting with either manual control using dedicated keys or automatic control through programmed operation.
Comprehensive safety features.

Special Price $4,599.00 Regular Price $5,110.00

Skip to the beginning of the images gallery

Stand not included.

Technical Documents

Warranty

Yamato Scientific Product Warranty

Details

Performance

Circulation Method: Forced air circulation
Operating Temp. Range: -5 to +50°C
Temp. Adjustment Accuracy: ±0.3°C (when refrigerator is in the continuous operation), ±1.0°C (when refrigerator is in the cycle operation)
Temp. Uniformity: ±1.0°C (when refrigerator is in the continuous operation at 37°C)
Max. Temp. Reaching Time: +20°C to +50°C approx. 30 min.
Min. Temp. Reaching Time: +20°C to -10°C approx. 55 min.

Components

Interior Material: Stainless steel SUS 304

Exterior Material: Electro-galvanized steel plate with baked-on epoxy and melamine resin finish

Inner Door: 5mm thick reinforced glass

Observation Window: None

Heat Insulating Material: Styro-foam (non-Freon)

Refrigerator (Medium: R-404A): Air cooling enclose type, 250W

Defrosting Mechanism: Manual ON/Automatic OFF, timer for cycle operation

Fan Type: Axial fan

Heater: Iron-chrome wire heater, 550W

Sensor: Platinum resistance bulb for temp. control, K-thermocouple for overheat prevention (double sensor)

Cable Hole: 30 mm I.D. (the right side)

Indoor Lighting Receptacle: Fluorescent lamp 10W/5A

Controller

Temp. Controller: PID control by microprocessor

Temp. Setting Method: Digital setting by UP/DOWN key

Temp. Display Method: Digital display orange LED (4 digit)

Timer/Min. Division: 0 min. to 999 hours 59 min./ 1 min.

Operation Function: Fixed temperature operation, program operation, auto-start, auto-stop

Program Mode: Program operation: Max. 32 steps, repeat and graduated operation

Additional Function: Integrating time function (up to 49,999 hours), calibration offset function, time display, main relay abnormal, fan stop

Safe Device

Safety Countermeasures: Self diagnosis functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection

Standard

Internal Dimensions (HxWxD mm): 600 x 477 x 500

External Dimensions (HxWxD mm): 710 x 645 x 915

Internal Capacity: 143L

Shelf Plate with Standard Load: Approx. 89 kg/ piece

Shelf Rest Step Number/Pitch: 13 steps, 30mm

Power Source 50/60Hz: 100/220V, single phase, 10.0A/4.6A

Weight: Approx. 89kg

Shelf Plate: Stainless steel, 3 pcs.

Shelf Bracket: 6 pcs.

More Information