Weller T0053664299N

ZeroSmog 4V Portable Fume Extractor with (2) Arm Kits for 4 Workstations

Features

Energy-efficient fume extraction system purifies air to up to 4 workplaces, included are 2 funnels, ideal for applications where a larger area needs to be covered and the funnel nozzle can be placed directly on the workbench
Equipped with a F7 fine dust pre-filter and a main filter consisting of: HEPA Particle filter H13 and wide band gas filter
(50 % active carbon / 50 % Chemisorb)
Constant Flow Control (CFC) guarantees automatic air flow regulation for each working place independent of the connected workplaces, at the same time avoiding unnecessary waste of suction power and saving energy
Electronic filter control with visible and audible filter alarm enables efficient filter performance monitoring
Quiet operation
A powerful, maintenance-free turbine (max. blower capacity 230 m³/h) provides continuous, long life performance
Can be remotely controlled with 1. remote control (optional accessory), 2. via a PC with RS232 connection or 3. with a WX / WT soldering station (requires the WT Hub - T0058768767)
Portable fume extraction unit with caster wheels allow easy movement, and placement under or next to the bench
Efficiency test via USB port

$3,010.00

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

The "Zero Smog 4V Kit 2 Funnel" fume extraction unit is easy to install and operate. It is designed for use as a small central system. The kit is supplied complete with 2 pieces: flexible hose, flex arm, funnel, valve and bracket. Ready for installation at the workplace. A powerful, maintenance-free turbine provides continuous fume extraction at a maximum air extraction rate of 230 m3/h. With constant flow control the turbine speed is automatically adjusted to demand, avoiding unnecessary waste of suction power resulting in energy savings.

Specifications

Dimensions L x W x H: 345 x 325 x 505mm
Compact Filter: Particle filter H13, broadband gas filter (50% activated carbon + 50% Chemisorb)
Compatible Nozzle: WX WT
ESD-Safe: Yes
Fuse: T1.6A
Maximum Capacity: 1-4 Workstations
Maximum Vacuum: 3,800 Pa
Power: 275 VA
USB: The USB port can be used to load firmware updates, run efficiency tests and log data. Do not leave the USB medium inserted for longer than 2 minutes. After this time expires, the USB module will switch off automatically.