IVX-400 Waist-Length ESD Jacket with 3 Pockets & Raglan Sleeves
In Stock
IVX-400 fabric meets the requirements of the National ESD Association's ANSI/ESD STM 2.1-2013, Category 3, "Garment used as primary grounding path for personnel" and/or "Grounded through a single wire constant monitor system", and will maintain these performance characteristics for a minimum of 100 washes or 2 years, whichever comes first.
Carbon suffused monofilament nylon is Shakespeare Resistat® fiber is conductive at 104 and is non-flaking and non-sloughing.
Surface resistivity of fabric is 105 ohms per square with only slight deterioration noticed after 50 launderings. (To maximum of 107).
Static decay rate per 101°C method 5000 volts to 500 in less than 0.1 second.
Fabric is light-weight, 70 denier with a unique construction which does not allow easy penetration of dust particles.
Finish is disperse-dyed heat set. Contains no softeners, hand builders, etc.
Size Chart
Size
XS
S
M
L
XL
2XL
3XL
4XL
5XL
Fits Chest
30-32
34-36
38-40
42-44
46-48
50-52
54-56
58-60
62-64
Finished Chest
41
43
47
50
54
57
60
64
66
Finished Sleeve
30
31
32
34
35
36
39
40
40
Jacket Length
30
32
32
32
32
33
33
33
34
Note:
All measurements are rounded to the nearest inch.
Length measurements are measured from center back of neck to finished hem.
Finished sleeve is measured from center back of neck to bottom of cuff.
Laundering Instructions
Cool or warm water wash with any commercially-available liquid detergent, tumble dry low heat or hang dry. DO NOT USE BLEACH OR FABRIC SOFTENERS. The carbon-suffused mono-filament nylon is sensitive to heat and should not be exposed to drying heat in excess of 120°F. Wash at 90°F (Maximum), and tumble dry at low heat or hang dry. This medium weight fabric will dry very quickly, and we recommend hang-drying for maximum life.