Disposable Diaphragm Valve

The TS5624 Disposable Diaphragm Valve features a "first to market" Disposable Material Path. Difficult fluids such as CAs and pre-mixed 2-part epoxies can now be dispensed without the need for frequent cleaning, by simply replacing the entire wetted area in a matter of seconds while the valve stays on the production line.

The wetted parts are manufactured from black polyethylene to prevent moisture and UV light from coming into contact with the dispense fluids. As a result, moisture-sensitive fluids such as cyanoacrylate and UV-cured adhesives can be dispensed reliably and accurately.

The TS5624 dispenses low to medium-viscosity fluids over a wide range of shot and bead sizes, down to a fraction of a microliter. An internal spring return makes the valves fully adaptable for use with Techcon controllers. A short opening stroke provides an extremely fast and positive shut-off. The seal-less valve design offers excellent moisture-sensitive resistance and the incorporated diaphragm creates a barrier between the wetted parts and the air cylinder.

Typical Applications

Dispensing pre-mixed 2-part epoxy | Dispensing Cyanoacrylate in bonding applications | Applying a of UV lacquer in CD/DVD spin coating applications

Specifications

• Weight: 0.25lbs. / 113g
• Fluid Inlet Port: Luer lock female
• Fluid Outlet Port: Luer lock male
• Aux Air Inlet Port: 10-32 UNF
• Activation Pressure: 70 psi - 90 psi (4.8bar - 6.2bar)
• Max Fluid Pressure: 60 psi (4.1bar)
• Mounting Port: 10-32 UNF female
• Viscosity Range: 1 - 50 000cps
• Wetted Parts: Black Polyethylene Compound
• Operating Frequency: 400+ cycles/min.