StatPro
STAT-R-4X40
Rubber ESD Flooring, 4' x 40' Roll
StatPro aisle-safe mats and runners provide the ultimate in Class Zero ESD protection for the most ESD-sensitive environments. It is the only conductive rubber product meeting both the recommended system resistance of ANSI/ESD S97.1 and the Body Voltage Generation for ANSI/ESD S97.2. Manufactured to meet Class Zero ESD applications.
This product is not compatible with StatPro Dry Adhesive.
- Ideal for explosives applications per NAVSEA OP 5 and DOD 4145.26M.
- Ideal for R&D labs, computer rooms, clean rooms, munitions, electronics manufacturing, and test and repair areas.
- Meets IBM 2011 guidelines for use as a grounded anti-static floor in a data center.
- Non-glare surface with an attractive natural stone pattern helps hide stains and scuff marks.
- Easy to maintain, never needs conductive wax.
- Resistant to chemicals and hot solder.
- Slip resistance exceeds ADA guidelines.
- State of the art properties make it ideal for use in areas where static can not be tolerated under any circumstances.
$2,047.24
StatPro Rubber ESD benefits:
- Easy to maintain, never needs conductive wax
- Helps minimize production loss and rejects
- Resistant to most oils and grease
- Chemical and hot solder resistant
- Withstands forklift/heavy wheeled traffic up to 850 PSI rolling load
- Slip resistance in compliance with ADA guidelines
StatPro Rubber ESD flooring is ideal for:
- Electronics manufacturing, assembly, test and repair
- Explosives Applications per NAVSEA OP 5 and DOD 4145.26M
- Any area where circuit boards are handled or used
- Engineering areas
- Design areas
- Research and development
- Electronics labs
- Access floors
- Networked offices
- Hospitals
- Meets the IBM Ohms resistance range for use in Data Centers
- Flight towers
- Command centers
- Casinos
- Communications Industry: TV & radio studios
- Retail environments
Specifications:
- Sheet size: 4' X 5', 4' X 6', 4' X 8', 4' X 40'
- Material thickness: 2 mm
- Conductivity Warranty: Lifetime conductivity per guidelines of ANSI/ESD S20.20.
- Standard: ASTM F 1344, for solid color homogeneous tiles and through mottled tiles as applicable
- Abrasion Resistance: Taber abrasion test, ASTM D 3389, H-18 wheel, 500 gram load, 1000 cycles, gram weight loss not greater than 0.70
- Hardness: ASTM D 2240, Shore A, not less than 85
- Slip Resistance: Static coefficient of friction (James Test): ASTM D 2047, equal to or greater than 0.6, ADA guidelines compliance
- Asbestos-Free: Products shall contain no asbestos.
- Flammability: ASTM E 648; NFPA 253; NBSIR 75 950 result to be not less than 0.45 watts per square centimeter, Class 1
- Smoke Density: ASTM E 662, NFPA 258, NBS smoke density, less than 450
- Burn Resistance: Solder burn resistant
- Halogen-Free: Products shall contain no halogens
- PVC-Free: Products shall contain no poly-vinyl-chloride
- Conductivity <1.0 x 106 resistance to ground when tested according to ASTM F150 and ESD.S7.1 under >30% relative humidity at room temperature
- Decay Time: 0.025 seconds when tested according to FTM 4046 101
- Static Generation: <20 volts when tested according to ESD STM 97.2
- System resistance: < 1.0 x 106 per ANSI/ESD STM 97.1 with conductive footwear (meets or exceeds recommended guidelines of ANSI/ESD S20.20)
| SKU | I309870 |
|---|---|
| Mfg. Part Number | STAT-R-4X40 |
| Brand | StatPro |
| ESD Properties | 10⁶ Resistance |
| Width | 4' |
| Length | 40' Roll |
| Thickness | 2.0mm |
| Material | Rubber |
Newsletter
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.