Conductive 2 Part Epoxy Floor Coating, Light Gray, 4 Gallon Pail
Statguard® Conductive Epoxy is a waterborne, two part epoxy floor coating formulated to control the dissipation of static electricity and provide path to ground. Statguard® Conductive Epoxy is very effective as a static control floor coating for electronics manufacturing, assembly, and storage. It is available in light grey RAL7038 / Pantone 5517C, in 4 gallon (15.14 liter) kits. The color may vary slightly between production lots.
Statguard Conductive Epoxy meets ANSI/ESD S20.20 and EN 61340-5-1 required limits of < 1 x 109 ohms for ESD flooring and is suitable for the flooring component in Footwear / Flooring Systems (< 1 x 109 ohms per ANSI/ESD STM97.1 and IEC 61340-4-5 and < 100 peak body voltage per ANSI/ESD STM97.2).
NOTE: The product should not be allowed to freeze. If the epoxy part A or part B freezes surround the closed container with hot water to thaw completely and melt the crystals back into liquid. Make sure epoxy is then brought up to room temperature 70°F (20°C) before mixing and using. Store at temperatures above 50 °F (10°C) as stated in the Safety Data Sheet. We recommend that these products be stored in their original containers and be sealed when not in use. We cannot guarantee performance if not properly stored, mixed or not installed before 3 months from date of sale.
| SKU | I386324 |
|---|---|
| Mfg. Part Number | 46057 |
| Brand | Statguard |
| ESD-Safe | Yes |
| ESD Properties | Conductive |
| Type | Paint |
| Size | 4 Gallons |
-
Wipers
Wipes for cleanrooms, labs & microelectronics and more. -
Swabs
Swabs available in many materials, styles & sizes. -
Gloves
Browse our selection of disposable, cleanroom, ESD gloves and more. -
Dispensing Bottles
Shop bottles for dispensing flux, solvents, and more.
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.