Platinum Addition Heat Curing Single Component Conformal Coating, 1kg Can

Typical Applications

• Coating circuit boards and other electronic components

Notes

• Must be shipped in dry ice and stored in cold storage
• Typically used in smaller, automotive sensor applications
• Needs an oven to cure

Typical Properties

• Type: Conformal Coating
• Cure Type: Addition
• One/Two Component: One
• Cold Storage: Y
• Color: Light Yellow Translucent
• Density @ 23°C (g/cm3): 1.01
• Viscosity (cps): 900.00
• Cure Conditions: 30min @ 120°C
• Working Time: 24 Hours
• Shore A Hardness: 27
• Tensile Strength (MPa): 2.20
• % Elongation: 180
• Shear Strength (MPa): 0.20
• Volume Resistivity (TΩ·m): 29
• Dielectric Strength (kV/mm): 27
• Dielectric Constant: 2.9 @ 50Hz
• Dielectric Dissipation Factor: 2.0 x 10^-4 @ 50Hz
• Thermal Conductivity (W/m·K): 0.20
• Usable Temperature Range (C): -40 to +200

Note: Values are not for specification purposes.