Ground Master Monitor with Ethernet Output

Features

• Ethernet Connectivity, provides network communication with Static Management Program (SMP). Data collected through SMP includes metal ground impedance and EMI voltage.
• Optical Relay, pairs with lights and buzzers for increased visibility.
• EMI Monitoring on Metal Grounds, alarms if the grounded metal tools have high-frequency noise that could cause electrical overstress (EOS) damage.
• Calibration Verification, use the SCS CTE701 Verification Tester to check the test limits of the Ground Master Monitor without removing it from its workstation.
• NIST Calibrated with Certificate Included, calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
• 100-240VAC Power Adapter with Interchangeable Plugs, works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe.
• Assembled in the United States of America with Globally Sourced Materials & assembled and stocked in Chino, CA.

Specifications

Power

• Power Adapter 100-240 VAC 50-60 Hz
• Output: 12 VDC @ 1.5 A
• Output Plug Polarization: Center Positive
• Output Plug: 5.5 mm O.D. x 2.1 mm I.D. x 9.5 mm L

Metal Tool

• Amount Monitored: 8
• Impedance Limit: 10 ohms (default)
• EMI Voltage Limit: 223 mV average amplitude (@ 1.5 MHz)
• Test Voltage: 80 mV square pulse @ open circuit (80 Hz)
• Test Current: <5 mA @ short circuit

Connectivity

• Input 18 AWG wire terminal blocks for metal tools
• Outputs 18 AWG wire terminal blocks for relay outputs

General

• Alarm LEDs and buzzer
• Dimensions 3.54" x 5.52" x 1.18" / (90mm x 140mm x 30mm)
• Weight: 0.4 lbs. (0.18 kg)