SCS 770067

WS Aware Dual-Wire Monitor with Standard Remotes & Ethernet Output

In Stock ESD-Safe

SCS 770069 Power Relay Compatibility, controls power to workbenches, hand tools, and other electronic devices dependent on the WS Aware Monitor's status. Dual Workstation Continuous Monitor, continuously monitors the path-to-ground integrity of two operators, two conductive or dissipative worksurfaces, and two metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01.

NEW SCS 770069 Power Relay Compatibility
Controls power to workbenches, hand tools, and other electronic devices dependent on the WS Aware Monitor’s status
Dual Workstation Continuous Monitor
Continuously monitors the path-to-ground integrity of two operators, two conductive or dissipative worksurfaces, and two metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01.
Ethernet Connectivity
Provides network communication with Static Management Program (SMP). Data collected through SMP includes operator resistance, operator voltage, mat resistance, metal tool impedance and metal tool EMI voltage.
Digital Signal Processing Technology
Applies an ultra-low test voltage to the operator (0.05V) for the handling of sensitive components.
Operator Body Voltage Detection
Alarms if the operator generates or contacts voltage that would be dangerous to an ESD susceptible item.
EMI Monitoring on Metal Grounds
Alarms if the grounded metal tools have high-frequency noise that could cause electrical overstress (EOS) damage.
System Includes Monitor and Two Remote Terminals
Monitor can be installed at eye level, and remote terminals can be mounted at desired locations up to 10 feet away. Each remote terminal includes a monitored jack for operators and an unmonitored jack for visitors.
Use with Dual-Wire Wrist Straps
See SCS Dual-Wire Wrist Straps.
NIST Calibrated with Certificate Included
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
Made in the United States of America.

$797.21

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Technical Documents

Product Videos

SCS 770067 WS Aware Dual-Wire Monitor Product Video

Warranty

SCS Product Warranty

Specification Sheets

SCS WS Aware Dual-Wire Monitor Specifications

Details

Specifications

Power

Power Adapter 100-240VAC 50-60 Hz
Output: 12 VDC @ 1.5 A
Output Plug Polarization: Center Positive
Output Plug: 5.5 mm O.D. x 2.1 mm I.D. x 9.5 mm L

Operator

Wrist Strap: Dual-Wire
Amount Monitored (Operator): 2
Amount Non Monitored (Visitor): 2
Resistance Limit: 10 megohms (default)
Test Accuracy: ±10% @ 10 megohms
Programmable Resistance Range: 2 to 35 megohms
Body Voltage Limit: ±2.5 VDC (default)
Programmable Voltage Range: 0 to ±5.0 VDC
Test Voltage: 50 mV @ open circuit, peak-to-peak

Worksurface Mat

Amount Monitored: 2
Resistance Limit: 100 megohms (default)
Test Accuracy: ±10% @ 100 megohms
Programmable Resistance Range: 100 megohms to 1 gigohm

Metal Tool

Amount Monitored: 2
Impedance Limit: 10 ohms (default)
Test Accuracy: ±10% @ 10 ohms
Programmable Impedance Range: 1 to 20 ohms
EMI Voltage Limit: 223 mV @ 1.8 MHz
Programmable EMI Range: 1 to 1,000 mV

Connectivity

Input: Mini-DIN for operator remotes; 25-28 AWG wire terminal block for worksurface mats and metal tools
Outputs: RJ45 connector Ethernet output; Molex #53261-0371 connector for relay output