1000 Series Metal-In Static Shielding Bags with Zip-Top
- Metal-In Film Laminate 0.0028" thick (2.8 mil): Protects ESD sensitive contents from electrostatic fields and electrostatic discharges (ESD)
- <10 nJ Discharge Shielding Energy Limit Test per ANSI/ESD STM11.31: Meets ANSI/ESD S20.20 and ANSI/ESD S541 requirements for ESD shielding packaging inside and outside an ESD Protected Area (EPA)
- Dissipative Inner and Outer Surfaces Rs 1 x 104 to <1 x 1011 ohms per ANSI/ESD STM11.11 and Static Control Bag ANSI/ESD S11.4 Level 3: Allows bag to be used throughout an ESD Protected Area and grounded when placed on a grounded surface or handled by a grounded operator
- Printed with ESD Protective Symbol and Lot Code Information: Meets the requirements of ANSI/ESD S541 for quality control purposes
- OpenTop and ZipTop styles are available
- Lead-free RoHS 2, REACH and Conflict Minerals Compliant
- Made in the United States of America:
This transparent metal-in static shielding bag is designed to provide a static safe environment for ESD sensitive electronic devices. Bags are printed with an ESD protective symbol and a lot code for traceability. Open top (1000 Series) and ZipTop (3000 Series) styles are available. The bags are heat sealable.
SCS Static Shielding Bags 1000 Series are manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in concert with the metal layer provides discharge shielding. The exterior being static dissipative allows electrostatic charges to be removed when grounded.
Physical | Typical Value | Testing Method |
---|---|---|
Tensile Strength | 4600 PSI, 32 MPa | ASTM D882 |
Puncture Resistance | 12 lbs., 53 N | MIL-STD-3010C Method 2065 |
Seal Strength | 11 lbs., 48 N | ASTM D882 |
Thickness | 2.8 mils, 0.071 mm +/-10% | MIL-STD-3010C Method 1003 |
Marking Adhesion | Pass | IPC-TM-650 2.4.1 |
Transparency | 40% | Tobias |
Electrical | Typical Value | Testing Method |
ESD Shielding | <10 nJ | ANSI/ESD STM11.31 |
Surface Resistance - Interior | 1 x 104 to < 1 x 1011 ohms | ANSI/ESD STM11.11 |
Surface Resistance - Exterior | < 1 x 1011 ohms | ANSI/ESD STM11.11 |
Static Decay | < 2 Seconds | ETS 406D |
Cleanliness | Typical Value | Testing Method |
Silicone | Not Detected | FTIR |
Heat Sealing Conditions | Typical Value | |
Temperature | 300ºF - 375°F, 149ºC - 190°C | |
Time | 0.5 - 3.5 seconds | |
Pressure | 330 - 70 PSI, 206 - 482 KPa |
Sold As | (Pack of 100) |
---|---|
SKU | G100281 |
Brand | SCS |
ESD-Safe | Yes |
Type | Metal-In |
Closure | Reclosable |