Conductive Rubber Electrode

What's Included

• PRS-801W 5lb Conductive Rubber Electrode
• PRS-801WH T-Handle
• Protective Cap

Product Overview

Measure Point-to-Point and Resistance-to-Ground Resistance
The PRS-801W is a precision electrode probe with a conductive rubber pad for use with any resistance meter. Used in point-to-point (Rtt) and point-to-ground (Rtg) resistance testing of floors, worksurfaces, mats, garments, chairs, carts or any flat object, the PRS-801W produces repeatable measurements in accordance with ANSI/ESD S4.1, ANSI/ESD S7.1, S9.2, STM2.1, STM12.1, STM97.1, ESD-ADV53.1, ASTM F150, TR53 and IEC 61340-2-3 standards.

Resistance under 100 ohms
Per ANSI/ESD S4.1, ANSI/ESD S7.1, the resistance between two electrodes placed on a metallic surface should be less than 1000 ohms when measured at 10V. Each PRS-801W surface resistance probe have a resistance of less than 100Ω.

Uses Standard Connection
Each PRS-801W is designed with a standard female banana receptacle for use with any of Prostat test leads, such as the 800LB and 800LR.

5lbs Probes Meeting ANSI/ESD S4.1 and ANSI/ESD S7.1 Standards
The PRS-801W meet the requirements of most standards for resistance, weight, diameter and durometer. To protect the conductive rubber pad, each probe is shipped with a plastic protective cap.

Technical Specifications

PRS-801W 5lb Conductive Rubber Electrode Specifications

• Resistance: < 100Ω
• Diameter: 2.5 ± 0.1" (63.5 ± 0.25mm)
• Durometer: Durometer hardness of 50-70
• Weight: 5lbs (2.27 kg) each ±2oz
• Height:
  • With Handle: 5.0"(127mm)
  • Without Handle: 3.75"(95.25mm)
• Connection: One female banana receptacle
• Color: Grey