Digital Static Decay Timer for Prostat PFM-711A & PFM-711B Field Meters

What's Included

• PDT-740B Static Decay Timer
• 700AC Analog Cable
• 9 Volt Alkaline Battery

Overview

Measure Decay Time of Ionizers
The PDT-740B Static Decay Timer is typical of Prostat's innovative technology and support of Professional ESD Control Managers and Auditors.

This unique accessory is designed to measure the decay time of ionizers from ±1,000 volts to less than 100 volts in accordance with ESD Association's Ionization Standard ANSI/ESD STM3.1, and measure material decay time to less than 50 volts and less than 10 volts.

Evaluate Ionizers and Packaging Materials
Properly used, the PDT-740B provides decay time measurements for evaluating ionizers, packaging materials, footwear, personnel grounding, production aids, some equipment and many other ESD control products.

Use it with the PFK-100B Field Meter Set
The PDT-740B Static Decay Timer is used with Prostat's precision portable Charge Plate Monitor kit components, including the PFM-711B Field Meter, CPM-720B Charge Plate Assembly and PCS-730B Electrostatic Charger.

Measure materials by using the PGB-745
For evaluating materials and other products, additional decay measurement accessories e.g., PGB-745 Decay Electrodes, or PRF-911 Concentric Ring fixtures are recommended.

Technical Specifications

• Controls: OFF-ON Cut Off Voltage, 10, 50 and 100 Volts (Selects Voltage to stop timing)
• Indicators:
  • Green LED: Decay Cycle Ready > ±1kV, CPM voltage > ±1,000 Volts
  • Red LED: Timing in Progress, CPM voltage decay timing activated
  • LOBAT: Displayed when battery voltage < 6.0 Volts
• Dislay: Liquid Crystal Display (LCD) displays elapsed decay time from ±1,000 Volts to selected Cut Off voltage in seconds and tenths of a second (00.0)
• Polarity: Automatically senses Positive & Negative voltage references
• Zero & Reset: Automatically Resets Timer and Display to 00.0 when Charge Plate Monitor voltage > ±1kV. Reset indicated when Green LED Decay Cycle Ready LED is ON
• Response: Approximately 200 milliseconds in combination with Field meter and Charge Plate Monitor
• Timing Range: From 0.2 to 159.9 seconds
• Timing Setpoints:
  • Reset when voltage input 100mv ±2 mv (1,000 Field Meter Volts ±20 V)
  • Cut Off Voltage @ 100 V: 10mv ±0.2 mv (100 Field Meter Volts ±2 V)
  • Cut Off Voltage @ 50 V: 5mv ±0.2 mv (50 Field Meter Volts ±2 V)
  • Cut Off Voltage @ 10 V: 1mv ±0.2 mv (10 Field Meter Volts ±2 V)
• Accuracy:
  • Cut Off Voltage @ 100 V: Typically ±5%
  • Cut Off Voltage @ 50 V: Typically ±5%)
  • Cut Off Voltage @ 10 V: Typically ±10%
• Power: 9 VDC alkaline battery (included)
• Battery Life: > 40 hours typical
• Dimensions: 11.4 cm L x 7 cm W x 2.5 cm H (4.50" L x 2.75" W x 1.0" H)
• Weight: 184 g (6.5 oz) with battery
• Warranty: 1 Year Limited Warranty