Momentive RTV167-85ML

High-Strength Electronics-Grade Moisture Cure Single Component Silicone Paste RTV Sealant, Gray, 85ml Tubes

(Case of 12)

RTV167 adhesive sealant from Momentive Performance Materials is a one-component, ready-to-use Electronics-Grade silicone sealants. It will cure to a tough, resilient silicone rubber on exposure to atmospheric moisture at room temperature.

Non-corrosive to electronic metals, including copper and brass
Low-odor cure, releasing an alcohol vapor from the sealant surface during cure
UL Recognition. Recognized by Underwriters Laboratories, Inc. under their Component Recognition Program (UL File No. E-36952)
Retains elastomeric properties for long periods at temperatures from -60°C (-75°F) to 205°C (400°F) and for short periods up to 260°C (500°F)
One component
Cure at room temperature
Excellent electrical insulation properties
Excellent resistance to moisture, dust, dirt, UV, oz.one, and chemical

$1,350.96

Skip to the beginning of the images gallery

Technical Documents

Product Info & TDS Sheets

Momentive RTV160 Series Technical Data Sheet

SDS/MSDS Sheets

Momentive RTV167 Safety Data Sheet

Details

Typical Physical Properties

Typical Uncured Properties

Color: Gray
Consistency: Paste
Specific Gravity: 1.12
Application Rate, gm/min: 180
Tack-Free Time, hours: 4

Cured Properties⁽¹⁾

Mechanical
- Hardness, Shore A: 37
- Tensile Strength, kg/cm² (lb/in²): 56 (800)
- Elongation, %: 600
- Peel Strength, kg/cm (lb/in)⁽²⁾: 10 (80)
Electrical⁽³⁾
- Dielectric Strength, kv/mm (v/mil): 20 (500)
- Dielectric Constant @ 60 Hz: 2.8
- Dissipation Factor @ 60 Hz: 0.0026
- Volume Resistivity, ohm-cm: 3 x 10¹⁵
Thermal⁽³⁾
- Brittle Point, °C (°F): -60 (-75)
- Maximum continuous operating temperature, °C (°F): 204 (400)
- Maximum intermittent operating temperature, °C (°F): 260 (500)
Additional Information⁽³⁾
- Thermal Conductivity, cal/sec/cm2, °C/cm (Btu/hr/ft2, °F/f): 0.0005 (0.12)
- Coefficient of Expansion, cm/cm, °C (in/in, °F): 27 x 10^-5 (15 x 10^-5)

(1) Cure time 7 days at 25°C (77°F), 50% relative humidity.
(2) 1 in. x 8 in. stainless steel screen at 180° pull angle.
(3) Information is provided for customer convenience only. Properties are not tested on a routine basis.

More Information