Tpcm™ 900 Thermal Phase Change Material
Tpcm™ 900 is a high-performance, non-electrically conductive phase change material. At 50°C, Tpcm™ 900 begins to soften and flow, filling the microscopic irregularities of both the thermal solution and the component's surfaces, thereby reducing thermal resistance. Tpcm™ 900 is a flexible solid at room temperature and freestanding without reinforcing components that reduce thermal performance.
Tpcm™ 900 shows no thermal performance degradation after 1,000 hours @130°C, or after 500 cycles, from -25°C to 125°C. The material softens and does not fully change state resulting in minimal migration (pump out) at operating temperatures (see viscosity curve). Tpcm™ 900 is supplied in rolls with top tabbed liners for easy manual or large volume automatic application. Individually die cut parts can also be supplied.
- Naturally tacky at room temperature, no adhesive required
- No heatsink preheating required
Industries
Consumer | Telecom/Datacom
Applications
Graphic Cards | Hard Disk Drives | IGBTs | Memory Modules | Notebooks/Tablets/Portable Devices | Servers | Smart Home Devices | Wireless infrastructure
Capabilities
Automated Packaging | Autoated Pad Placement | Custom Automation | Custom Product Development | Modeling | Prototyping | Service | Testing
Specifications
- Construction: Non-reinforced boron nitride filled film
- Color: Yellow
- Thickness:
- 905C: 0.005" (0.13mm)
- 910: 0.010" (0.25mm)
- 920: 0.020" (0.51mm)
- Thickness Tolerance:
- 905C/910: ± 0.001" (± 0.025 mm)
- 920: ± 0.002" (± 0.05 mm)
- Density:
- 905C: 1.31 g/cc
- 910/920: 1.39 g/cc
- Temperature Range: -25 to 125°C
- Phase Change Softening Temperature: 50°C - 70°C
- "Burn In" Temperature: 70°C for 5 minutes
- Thermal Conductivity (W/mK):
- 905C: 0.7
- 910/920: 2.23
- Volume Resistivity: 2 x 1013 ohm-cm
- Dielectric Constant @1 MHz: 3.1
Thermal Impedance
| Tpcm™ 905C | Tpcm™ 910 | Tpcm™ 920 | |
|---|---|---|---|
| @ 10 psi (69 KPa) | 0.048°C-in2/W (0.31°C-cm2/W) |
0.14°C-in2/W (0.90 °C-cm2/W) |
0.18°C-in2/W (1.14°C-cm2/W) |
| @ 50 psi (345 KPa) | 0.029°C-in2/W (0.19°C-cm2/W) |
0.083°C-in2/W (0.53°C-cm2/W) |
0.095°C-in2/W (0.61°C-cm2/W) |
- Standard Thicknesses: 0.005" (0.13 mm), 0.010" (0.25 mm) and 0.020" (0.51 mm). Consult the factory for alternate thicknesses.
- Standard Sheet Sizes: 9" x 9" (229 mm x 229 mm) Tpcm™ 900 sheets are supplied with a white release paper and a bottom liner.
- Pressure Sensitive Adhesive: Pressure sensitive adhesive is not applicable for Tpcm™ products.
- Reinforcement: No reinforcement is necessary.
| SKU | G101075 |
|---|---|
| Brand | Laird |
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.