EMIT 50180

SmartLog Pro® 2 with Proximity Card Reader

In Stock ESD-Safe

Features & Benefits

7 Inch Resistive Touchscreen - Accepts input from gloved operators and probes
Wi-Fi Connectivity
Customizable Proximity Card Reader - Reads virtually any proximity or contactless card type in the world
3-Prong Safety Certified Power Adapter - Supplies ground without the need for additional wiring
Wiegand Interface - Pairs with the 50177 Facial Recognition Terminal and other access control devices
Replaceable Dual-Wire Wrist Strap Jack
VGA Video Output - Mirrors the display onto an external monitor
SmartLog Pro® Manager Web App Compatibility - Access test data and reports from any web browser
Tests the Operator's Path-to-Ground
Electronic Data Acquisition - Creates test record database for auditing and quality control
Assigned Test Requirement - Controls access to ESD Protected Area based on operator's test requirements.
Records Resistance Measurements, Temperature, and Relative Humidity
Software Programmable Test Limits - Use to meet the testing requirements of ANSI/ESD S20.20 or other standards
Normally Open and Normally Closed Relay Terminals - Pairs with a turnstile, automatic door, or other locking system to control access to ESD Protected Areas (EPAs)
Simultaneous Testing in Less Than 2 Seconds
Stand-Alone Operation - Operators can continue performing tests even in the event of a network failure
Split Foot Plate for Testing Foot Grounders (or Shoes) - Tests both foot grounders independently at the same time
NIST Calibrated

$5,150.00

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Technical Documents

Product Videos

EMIT 50180 SmartLog Pro® 2 Calibration

EMIT 50180 SmartLog Pro® 2 Installation Overview

EMIT 50180 SmartLog Pro® 2 Product Video

Product Info & TDS Sheets

EMIT 50180 SmartLog Pro® 2 Technical Data Sheet

Details

The EMIT SmartLog Pro® 2 verifies the functionality of an operator’s wrist strap and footwear, logs the test results, and controls access to an ESD Protected Area.

The default test limits are set to:

Wrist Strap: 750 kilohms to 10 megohms
Footwear: 750 kilohms to 35 megohms

All operator test activity is logged into the SmartLog Pro® Manager Web App to meet the ANSI/ESD S20.20 requirements for an ESD Control Plan. The app is installed onto one server and accessed via a web browser. Each log entry includes operator identification, test results, resistance measurements, time, temperature, and humidity. Operator identification and access control is initiated with the embedded rf IDEAS WAVE ID® Plus proximity card reader or touchscreen keypad. Access control to an ESD Protected Area can be further enforced by using the relay terminal and connecting to an electronic door lock or turnstile to grant access only to those who have passed their pre-defined ESD tests and are authorized to be in the ESD Protected Area.

The seven-inch color touchscreen on the SmartLog Pro® 2 provides an intuitive user interface for easy test operation and a clear indication of test results. The operator average test time is 2 seconds. Internal flash memory allows operators to continue using the tester even if network failure were to occur. All test transactions download to the database once the network connection is restored. The SmartLog Pro® 2 is calibrated to NIST traceable standards.

SmartLog Pro® Manager automates the collection of ESD personnel grounding tests and maintains records for a Compliance Verification Plan as required by ANSI/ ESD S20.20. It includes functions for tracking employee leave time, shift and department assignments, and ESD training accreditation. SmartLog Pro® Manager generates automated reports that may be e-mailed to track short term and long term corrective actions. Test limits and test parameters (wrist strap only, footwear only, wrist strap and footwear, etc.) may be customized with the web app to meet special requirements. SmartLog Pro® Manager is only compatible with the SmartLog Pro® SE and SmartLog Pro® 2 models. It is required for every SmartLog Pro® 2 system installation. Contact EMIT Customer Service to schedule an installation session.

Includes

(1) SmartLog Pro® 2
(1) Wall Bracket
(1) Dual Foot Plate
(1) Power Adapter
(1) Power Cord with North America Plug (50180 only)
(1) Foot Plate Cable
(1) Micro USB Cable
(1) Ground Cord
(1) Thumb Screw
(2) Mounting Anchors
(2) Mounting Screws
(2) Zip Ties
(1) Plunger and Spring Assembly for 10mm Wrist Cord Adapter

Specifications

Input Voltage and Frequency (External Adapter): AC/DC Power Adapter
Power Input: 100-240 VAC, 50/60 Hz
Power Output: 9.0 VDC, 3.0 A
Power Adapter Cable Length: 5.0' (1.5m)
Power Cord Length: 7.5' (2.3m)
Operating Temperature: 70° to 85°F (21° to 30°C) for 1 gigohm test limit / 41° to 85°F (5° to 30°C) for all other test limits
Dimensions 5.3" x 9.0" x 1.1" (135 x 229 x 28mm)
Weight: 1.7 lbs. (0.8kg)
Test Accuracy: ±20% for 1 gigohm footwear test limit / ±10% for all other test limits
Test Switch Voltage: 5 VDC @ open circuit
Wrist Strap and Footwear Test Voltage: 30 VDC @ open circuit Test current is limited by resistors and varies on the test range setting (100 kilohms - 1 gigohm)
Temperature Accuracy: ±0.5°C
Humidity Accuracy: ±5%
Available Languages: English, Spanish, Japanese, Chinese (Simplified), Turkish, Thai, French
Dimensions:13.25" x 15.25" x 1.125" (337mm x 387mm x 29mm)
Weight: 5.5 lbs. (2.5kg)
Cable Length: 7.0' (2.1m)
Made in USA