Anti-Static High-Temperature Polyimide Tape, 108' Rolls

• Low Charging Polyimide Film (2.4 Mils Thick) with Polysiloxane Adhesive - Wescorp tape generates less 50 volts when unwound from roll (at 73°F, 45% RH average) making it safe to use around most ESD sensitive items*
• Surface Resistance 1 x 10⁸ to < 1 x 10¹¹ ohms Tested per ANSI/ESD S11.11 - Meets dissipative limit requirements of packaging standard ANSI/ESD S541
• Temperature Resistance to a Maximum of 572°F (300°C) for 10 Second Max - May be exposed to high temperatures for wave soldering and other applications without leaving residue when removed
• Lead-Free RoHS Compliant

*All tapes will generate some amount of triboelectric charge when unwound from roll. Standard, non-ESD tapes typically generate more than 1000 volts when unwound from roll. If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape.

Applications for High-Temp Polyimide Tape

• Ideal for masking gold leads and other components on boards populated with sensitive integrated circuits
• Thick conductive adhesive excellent for conformability to protect critical PCB features
• Near zero voltage generation when tape unrolled from roll [at 50% relative humidity]
• Near zero voltage generation when tape removed from PCB [at 50% relative humidity]
• Masking off PCBs for IR reflow ovens

Specifications

• Tape is wound on a plastic core
• ESD protective symbol is marked on the product (located on the core of the roll) per ANSI/ESD S541
• Marked with manufacture information per ANSI/ESD S541 for quality control purposes
• Removal leaves little or no residue
• Static charge generation during unwind and peel off stainless steel plate application is 5 volts @ 50% RH
• 1.0 mil thick (0.001" or 0.0254 mm) Polyimide Film (DuPont Kapton® or equivalent)
• 1.4 mil thick (0.0014" or 0.0356 mm) conductive polysiloxide adhesive
• Adhesive surface resistance 1 x 10² to < 1 x 10⁵ ohms per ANSI/ESD STM11.11
• Film surface resistance 1 x 10⁸ to < 1x 10¹¹ ohms per ANSI/ESD STM11.11
• Max Temperature 260°C (500°F)
• For best results, apply to board using a rubber roller