Anti-Static High-Temperature Masking Tape, 180' Rolls

• Low Charging Crepe Paper (7.0 Mils Thick) with High-Tack Rubber Adhesive - Wescorp tape does tribocharge, but has minimal charge retention, making it safe to use around most ESD sensitive items.*
• Temperature Resistance to a Maximum of 135°C (275°F) for 45 Minutes
• Surface Resistance 1 x 10⁸ to <1 x 10¹² Ohms - Tested per ANSI/ESD S11.11 to meet dissipative limits of packaging standard ANSI/ESD S541.
• Lead-Free RoHS Compliant

*All tapes will generate some amount of triboelectric charge when unwound from roll. If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape.

Applications for High-Temp Masking Tape

• Silk screening applications
• Masking application in spray and brush painting, non-staining
• Protective purposes in manufacturing processes, strips clean
• For securing polyethylene sheeting to walls during painting
• For OEM repair shops
• Use in applications masking PCBs gold features for wave soldering or soldering under 302°F (150°C)
• For best results, apply to board using a rubber roller
• Thick conductive adhesive excellent for conformability to protect critical PCB features
• Easily handles high temperatures of wave soldering without leaving significant residue
• Handles temperatures found in test and burn-in ovens

Specifications

• Waterproof
• Non-toxic
• pH neutral
• Non-corrosive
• Does tribocharge, but has minimal charge retention
• Thickness: 7 mil (0.007" or 0.18 mm)
• Adhesive surface: 1.2 x 10¹¹ ohms
• Film resistance: < 1 x 10¹¹ ohms tested per ANSI/ESD S11.11 at 50% RH
• Max Temp: 135°C (275°F) 45 minutes
• Tensile: 22 lbs./in.
• Adhesion to Steel: 35 oz./inch²
• Elongation: 8%
• Temperature Range: -32°F to +275°F
• Adhesive Mass: Natural
• Rubber Adhesive: Non-Staining