Desco 19350

Touch Tester, 120V

In Stock ESD-Safe

Connects to utility ground when plugged in - Quick, easy installation and grounding of both wrist straps and table mats.
Tests entire circuit - wrist strap, cord, and skin contact - Reliable resistance test
Acts as common point ground for the worksurface - No other ground cords needed
Test performed during normal use at the workstation - Improved productivity, workers test without having to leave the workstation
Provided with calibration to NIST traceable standards; calibration unit available for users to maintain NIST calibration at their facility - Simple means to assure accurate performance Lower calibration life cycle costs
Includes Adapter - Also available separately (98256) if replacement is required
Range: 750 Kilohms - 10 Megohms
NIST Calibrated - Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
Made in the United States of America

$124.13

Skip to the beginning of the images gallery

Technical Documents

Warranty

Desco Product Warranty

Product Info & TDS Sheets

Desco Touch Tester - Operation, Installation and Calibration Instructions

Details

"Compliance verification should be performed prior to each use (daily, shift change, etc.). The accumulation of insulative materials may increase the foot grounder system resistance. If foot grounders are worn outside the ESD protected area testing for functionality before reentry to the ESD protected area should be considered." (ESD SP9.2 APPENDIX B - Foot Grounder Usage Guidance)

"A log should be maintained which verifies that personnel have tested their personal grounding devices." (ANSI/ESD S20.20 Paragraph 6.2.2.2 Personnel Grounding Guidance)

"Frequency of Functional Testing: The wrist strap system should be tested daily to ensure proper electrical value. Nominally, the upper resistance reading should be < or = 10 megohms or a user-defined value." (ANSI/ESD S1.1-2006 Annex A3)

More Information