X3 Combo Tester with Dual Foot Plate
- Tests Operator’s Path-To-Ground; Wrist Strap Limits 750 kilohms to 10 megohms, Footwear Limits 750 kilohms to 35 megohms1: Determines that operator’s personal grounding devices (wrist straps2, foot grounders, ESD shoes, smocks3) are functioning correctly.
- Simultaneous Testing of Wrist Strap and Footwear in Less Than 3 Seconds: Reduces time spent testing personal grounding devices used in ESD Control Plans
- Solid-State Test Switch with No Moving Parts: Maintains accuracy of tests and extends the lifetime of the tester
- Split Foot Plate for Testing Foot Grounders (or ESD Shoes): Tests both foot grounders independently at the same time
- 30 Volt Test Signal: Provides accurate tests that are not humidity dependent
- Relay for Use with Automatic Doors or Other Locking Systems: Controls access to ESD Protected Areas
- Optional Stand: Use the Desco 19272 stand as an alternate installation method for the Combo Tester X3
- Compatibility with ESD Glove Test Fixture: Pair with the EMIT 50755 ESD Glove Test Fixture to allow operators to perform tests while wearing gloves or finger cots
- Calibration Verification: Use the EMIT 50424 Limit Comparator to check the test limits of the Combo Tester X3 without removing it from the workplace
- NIST Calibrated with Certificated Included: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
- 100-240VAC Power Adapter with Interchangeable Plugs: Works with standard electrical systems in North America, the United Kingdom, Japan, Asia, and Europe
- Made in the United States of America
1Default test limits are listed. Additional test settings are noted in the technical bulletin.
2The Combo Tester X3 can verify both single-wire and dual-wire wrist straps.
3The Combo Tester X3 will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 107 ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.
SKU | I235382 |
---|---|
Mfg. Part Number | 19270 |
Brand | Desco |
ESD-Safe | Yes |
Type | Combination Tester |
Includes | NIST Certificate |