Desco 17200

Premium Hook & Loop Heel Grounder, 1 MegOhm Resistor

In Stock

Hook and Loop Stretch Hook And Loop Fastening System: Size adjustable material expands to fit most shoe sizes comfortably and flex during walking
Tear Resistant Rubber With Inner Scrim: Reinforced material prevents tearing - increasing the service life of foot grounder
30" Long, 8 Conductive Strand Nylon Polyester Grounding Tab: Additional conductive material provides reliable connection with operator’s sweat-layer
Non-Marring Interior Layer: Will not mar operator’s shoes
One Megohm Series Resistor: To protect operator from accidental contact with equipment line voltage
UL Listed: Independently reviewed for adequacy of the product's design
RG: 1 x 10⁶ < 1 x10⁸ ohms per ESD SP9.2 7 ESD TR53
Date Coded: Provides lot traceability to ensure quality control and tracking information
Made In The United States of America

$10.50

Skip to the beginning of the images gallery

Technical Documents

Product Info & TDS Sheets

Desco 17200 Technical Data Sheet

Desco Foot Grounders - Grounding, Testing, and Maintenance

Warranty

Desco Product Warranty

Details

Per ESD SP9.2 APPENDIX B - Foot Grounder Usage Guidance “ Compliance verification should be performed prior to each use (daily, shift change, etc.). The accumulation of insulative materials may increase the foot grounder system resistance. If foot grounders are worn outside the ESD-protected area testing for functionality before reentry to the ESD-protected area should be considered.”

Per ANSI/ESD S20.20 Paragraph 6.2.2.2 Personnel Grounding Guidance, “ ESD protective flooring, used with approved footwear, may be used as an alternative to the wrist strap system for standing operations.”

ESD Handbook TR 20.20 paragraph 5.2.3 “ If the contact area between the bottom of the foot and the floor is not continuous, charge generation may occur especially when a person is walking. Heel straps must be worn on both feet to minimize the amount of time that the body of the person is isolated from the ground while walking.”

Suitable for ESD footwear component in Flooring - Footwear System personnel grounding method (<3.5 x 10E7 ohms per ESD STM 97.1).

Suitable for ESD footwear component in flooring - Footwear System personnel grounding method (<100 volts per ESD STM 97.2).

More Information