Corrugated Switchboard Non-Conductive Mat, Black
As low as $949.95
Switchboard mats are non-conductive mats designed for use in high voltage areas. Corrugated Switchboards are designed to protect workers from electrical shock by insulating against high voltage.
- Type II, Class 2 (meets additional testing for flame, oil, and ozone resistance)
- Conforms to ASTM D-178-01 testing
- Tested dielectric strength is 30,000 volts
- Maximum use voltage is 17,000 volts
- 1/4", non-conductive
Specifications
Material: PVC (vinyl)
Thickness: 1/4 inch (0.25")
Standards & Testing:
- Passes electrical proof test ASTM D178 (Min. 20,000 V for one minute)
- Passes dielectric breakdown test ASTM D149 (Min. 30,000 V)
- Passes O3 resistance test method B ASTM D178 (any visual degradation)
- Tensile strength ASTM D412 DIE C (Minimum 700 PSI): 1,318 PSI, PASS
- Elongation ASTM D412 DIE C (Minimum 250%): 317%, PASS
- Tension set ASTM D412 DIE B (Maximum 0.50 in.): 0.4827 in., PASS
- Moisture absorption ASTM D570 (Maximum increase 3%): 0.09%, PASS
- Accelerated aging ASTM D573 (Minimum 50% of original tensile strength): 1,363 PSI (103% of original tensile strength), PASS
- Flame resistance ASTM D178 Appendix (Maximum 0.5 in./12.7mm after 30 seconds): 0.12 mm/s, PASS
- Oil resistance ASTM D471 (Maximum volume increase 4%): 0.04%, PASS
Cleaning Instructions
Switchboard mats can be cleaned by scrubbing with a deck brush (when needed) using detergent with a neutral pH, and rinsed with a hose or pressure washer. Mats should be laid flat or hung to dry.
SKU | K100721 |
---|---|
Mfg. Part Number | 781 |
Brand | M+A Matting |
ESD Properties | Non-Conductive |
Thickness | 1/4" |
Surface | Ribbed |
Material | PVC |
Color | Black |