Comfort Scrape Indoor/Outdoor Wet/Dry Nitrile Slip-Resistant Anti-Fatigue Mat, Black

Recommended Uses

Recommended for use in commercial and industrial settings.

Mat Sizes

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

Specifications

Material: High-density, closed cell nitrile rubber foam

Thickness: 3/8 inch (0.375")

Standards & Testing:

• Compression Deflection:
  • 43.8% at 20 psi
  • 55.7% at 40 psi
• Certified high-traction by the National Floor Safety Institute (NFSI)
• Passes flammability standard DOC-FF1-70
• ASTM C1028-96 static coefficient of friction:
  • Dry 1.00 
  • Wet 0.91
• ESD rating of static dissipative:
  • Surface to surface at 50% relative humidity 2.0 X 10⁹ ohms
  • Surface to surface at 12% relative humidity 2.5 x 10⁹ ohms

Cleaning Instructions

Comfort Scrape mats can be cleaned in several different ways.

• Commercially laundered (see Laundering Instructions)
• Sterilized in an autoclave
• Washed by hand using the following instructions: Scrub with a deck brush (as needed), using a detergent with a neutral pH. Rinse with a hose or pressure washer. Hang to dry.

Laundering Instructions

Comfort Scrape mats can be commercially laundered to remove oil, grease, and soil. The formula below does not require extensive mechanical action or drying; it is designed to dissolve grease residue by using hot water to emulsify oils and grease.

1. Flush 2-3 minutes, high water level, 120°F (49°C)
2. Break 5-10 minutes, high water level, 140°F (60°C)
3. Rinse 2 minutes, high water level, 120°F (49°C)
4. Rinse 2 minutes, high water level, cold
5. Lay mats flat following removal from washer. Allow to cool before rolling.