WaterHog® Inlay Fashion Indoor/Outdoor Wiper/Scraper Custom Logo Mat
As low as $232.95
WaterHog® Inlay mats feature your logo inlaid with razor-sharp precision in a WaterHog® mat. During the precise inlay process, the area that will display your logo is cut from the mat and appropriate colors are inlaid in the cut-out, much like a jigsaw puzzle.
- Clean & Dry - Bi-level surface effectively scrapes dirt and moisture from shoes, trapping it beneath shoe level to prevent tracking; water dam border holds moisture keeping it off your floors (WaterHog® mats can hold up to 1 1/2 gallons of water per square yard)
- Durable & Fade Resistant - Reinforced rubber nubs prevent pile from crushing and extend the performance life of the mat; solution-dyed fabric is fade-resistant
- Safe - Beveled edges provide a safe transition from floor to mat; certified high-traction by the National Floor Safety Institute (NFSI)
- Eco-Friendly - Rubber backing contains 20% post-consumer recycled rubber from car tires
- Features 78-mil SBR rubber with choice of smooth or universal cleated backing
A sales representative will contact you for your artwork after you've completed checkout. If you have questions regarding artwork requirements, please contact us before purchasing.
About WaterHog®
WaterHog was introduced commercially in 1986 and quickly became America’s favorite mat. It offers industrial-strength performance with a variety of attractive patterns to suit any taste. The signature bi-level surface features stain-resistant fabric over durable rubber nubs, recessed channels, and a water dam border. The nubs effectively scrape dirt and wipe moisture from shoes, trapping it in the channels below shoe level to prevent tracking.
Mat Sizes
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
Specifications
Surface:
- Fiber: Solution-dyed polypropylene
- Weight: 24 ounces/yard2
- Construction: Needle-punched
- Design: Waffle
Backing:
- Material: SBR rubber - smooth or universal cleated
- Thickness: 78-mil (body thickness 78-mil; border thickness 143-mil)
Overall Mat Thickness: 3/8 inch (0.3750")
Standards & Testing:
- Certified high-traction by the National Floor Safety Institute (NFSI)
- Passes CPSC FF 1-70 for the surface flammability of carpets
Design Specifications
WaterHog® Inlay mats are produced using an inlay process, where colored material is cut and pieced together by hand before pressing into rubber. As a result, there are very strict design requirements for this product. PMS color matching is not available. White material should not be used as the background color or for large sections of the mat as it is difficult to keep the color clean.
- Minimum Text Height: 3" (includes lower case text)
- Minimum Line Thickness: 3/8"
- Any space between letters or design elements must be at minimum 3/8"
The text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
Gradients, tints, screens and transparencies are not supported and should not be used.
| Mat Size | Maximum Imprint Area | Fashion |
|---|---|---|
| 2' x 3' (23" x 35") | 21" x 33" | 20" x 32" |
| 3' x 4' (35" x 45") | 33" x 43" | 32" x 42" |
| 3' x 5' (35" x 58") | 33" x 56" | 32" x 55" |
| 3' x 10' (35" x 116") | 33" x 114" | 32" x 113" |
| 3' x 12' (35" x 142") | 33" x 140" | 32" x 139" |
| 3' x 16' (35" x 189") | 33" x 187" | 32" x 186" |
| 3' x 20' (35" x 236") | 33" x 234" | 32" x 233" |
| 4' x 6' (45" x 69") | 43" x 67" | 42" x 66" |
| 4' x 8' (45" x 96") | 43" x 94" | 42" x 93" |
| 4' x 10' (45" x 116") | 43" x 114" | 42" x 113" |
| 4' x 12' (45" x 142") | 43" x 140" | 42" x 139" |
| 4' x 16' (45" x 189") | 43" x 187" | 42" x 186" |
| 4' x 20' (45" x 236") | 43" x 234" | 42" x 233" |
| 6' x 8' (70" x 97") | 68" x 95" | 67" x 94" |
| 6' x 12' (70" x 144") | 68" x 142" | 67" x 141" |
| 6' x 16' (70" x 189") | 68" x 187" | 67" x 186" |
| 6' x 20' (70" x 236") | 68" x 234" | 67" x 233" |
Cleaning Instructions
WaterHog® Inlay mats can be cleaned using the following instructions:
- Vacuum regularly (daily in high-traffic commercial areas; weekly in lower-traffic areas)
- Extract or hose off as needed to remove heavy soil/debris
- Hang mat to dry
Always make sure the mat is dry before placing it back in service.
| SKU | K101840 |
|---|---|
| Mfg. Part Number | 235 |
| Brand | M+A Matting |
| Thickness | 3/8" |
Custom Image Logo Mats Available!
Inspire a great first impression from step one with custom Waterhog Impressions HD logo entry mats with self-designed images or branding at no extra charge. Design your own!
-
Floor Tape & Signage
Floor signage increases productivity and worker safety. -
Chairs & Seating
Choose from Industrial, ESD, Cleanroom or Lab Chairs & Stools. -
Ergonomic Accessories
Additional accessories that promote good ergonomics. -
Wire Shelving
Open wire shelf design helps facilitate air flow in clean environments. -
Workbenches
Browse hundreds of laminate, frame options, and accessories.
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.